An igniter that clicks all night, a coil that glows on one side only, a glass top with a fresh crack: these are the calls we take every day. One call connects you with a licensed, insured independent cooktop pro around Altadena.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
The technicians in our network are independent business owners who carry their own licensing and insurance. You are welcome to ask for proof at the door, and a good pro will not blink.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Stove pros carry a manometer for gas pressure, a multimeter for switches and elements, spare igniters, burner orifices and the service manual for your model. That kit is what turns a guess into a real diagnosis.
Freestanding ranges, slide-in ranges, drop-in cooktops, induction surfaces and the heavy pro-style rangetops with open burners all come through our line. The problem is almost always on top: a burner, an igniter, a switch, a control board or the glass itself.
Have the model number handy if you can. It usually sits on a sticker under the cooktop lip, inside the storage drawer, or behind the lower kick panel, and it lets the tech pull the right parts list before arrival.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
If the flame looks orange, ragged or jumps off the burner, something is off with air or gas delivery. The independent pro cleans the ports and orifice, confirms the cap sits flat, and measures manifold pressure against the spec on the tech sheet.
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
A crack in a smooth-top is more than cosmetic: spills can reach live elements underneath. The tech tests the radiant element and limiter, checks the hot-surface indicator, and quotes a new glass top if the old one is damaged.
Induction cooktops throw error codes when a pan is not magnetic, the cooling fan stalls, or the power board fails. The pro reads the code, tests cookware compatibility with a magnet, and checks the fan and board before any part goes in.
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
This table is not a substitute for a diagnosis, but it helps you describe the problem clearly to our dispatcher.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
The process is short on purpose. You call, a local pro shows up, you see a quote, and the burner gets tested in front of you.
Call +1-855-636-0185 and describe the burner, the fuel type and the brand. The dispatcher checks which independent stove pros near Altadena have openings.
The technician drives to your home with common igniters, coil elements, switches and orifices on the truck. You get the arrival window on the call, and callers frequently see a pro the same day when someone nearby is available.
The pro tests the burner circuit or gas train with a multimeter or manometer, explains what failed, and writes an upfront quote. Nothing gets replaced until you say yes.
The job ends with a real test: each burner on low, medium and high, plus a soap or electronic leak check on gas connections. Ask the pro to put the parts and labor warranty in writing.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Our dispatch line is answered day and night.
The igniter on our gas range would not quit clicking after a boil-over. The pro pulled the knobs, traced it to one wet switch under the panel, replaced it and tested every burner before he left.
I own a couple of older rentals and one tenant reported a burner that smelled hot. The technician found a melted receptacle block on the coil range, replaced it with new terminals and a new coil, and showed me the scorched wiring. Glad we caught it.
My induction cooktop kept flashing an error and shutting off in the middle of cooking. The tech checked my pans with a magnet first, which was fair, then found the cooling fan was jammed with grease. Cleaned and replaced the fan, and it has run fine since.
We moved into a house with propane and brought our natural gas range. The dispatcher found a pro who converted it the next morning, swapped every orifice, flipped the regulator and checked the flames burner by burner. He also put in the anti-tip bracket the old owners never installed.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
It is worth treating as a warning. Healthy burners show a firm blue flame. Yellow tips point to a dirty burner, a misaligned cap, or gas pressure that is off, and the technician can confirm it with a manometer.
Shut off power at the breaker for an electric range, or close the gas shutoff valve behind a gas range, then call us. A burner stuck on usually means a welded infinite switch, a stuck relay, or a valve that will not seat.
A crack lets liquid reach live parts, so the glass has to be replaced. The technician quotes the new top in writing, and most models allow the glass to be swapped without replacing the whole range.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Start with a magnet test on the pan. Aluminum, copper and some stainless pans will not work on induction. If the cookware checks out, a pro can read the error code and test the generator board and fan.
We route stove calls from across Altadena and the surrounding towns. Whether your range sits in a downtown condo or a farmhouse at the edge of the county line, our dispatchers look for the closest pro with time to come out.
Landlords and property managers use the line too, since a dead burner in a rental becomes an urgent tenant call fast. Tell the dispatcher who will be home to let the technician in.
One call to our dispatch line connects you with a local stove pro.
